RabbitMQ tutorial - Routing

Routing

(using Spring AMQP)

info

Prerequisites

This tutorial assumes RabbitMQ is installed and running on localhost on the standard port (5672). In case you use a different host, port or credentials, connections settings would require adjusting.

Where to get help

If you're having trouble going through this tutorial you can contact us through the mailing list or RabbitMQ community Slack.

In the previous tutorial we built a simple fanout exchange. We were able to broadcast messages to many receivers.

In this tutorial we're going to add a feature to it - we're going to make it possible to subscribe only to a subset of the messages. For example, we will be able to direct only messages to the certain colors of interest ("orange", "black", "green"), while still being able to print all of the messages on the console.

Bindings

In previous examples we were already creating bindings. You may recall code like this in our Tut3Config file:

@Bean
public Binding binding1(FanoutExchange fanout,
    Queue autoDeleteQueue1) {
    return BindingBuilder.bind(autoDeleteQueue1).to(fanout);
}

A binding is a relationship between an exchange and a queue. This can be simply read as: the queue is interested in messages from this exchange.

Bindings can take an extra binding key parameter. Spring AMQP uses a fluent API to make this relationship very clear. We pass in the exchange and queue into the BindingBuilder and simply bind the queue "to" the exchange "with a binding key" as follows:

@Bean
public Binding binding1a(DirectExchange direct,
    Queue autoDeleteQueue1) {
    return BindingBuilder.bind(autoDeleteQueue1)
        .to(direct)
        .with("orange");
}

The meaning of a binding key depends on the exchange type. The fanout exchanges, which we used previously, simply ignored its value.

Direct exchange

Our messaging system from the previous tutorial broadcasts all messages to all consumers. We want to extend that to allow filtering messages based on their color type. For example, we may want a program which writes log messages to the disk to only receive critical errors, and not waste disk space on warning or info log messages.

We were using a fanout exchange, which doesn't give us much flexibility - it's only capable of mindless broadcasting.

We will use a direct exchange instead. The routing algorithm behind a direct exchange is simple - a message goes to the queues whose binding key exactly matches the routing key of the message.

To illustrate that, consider the following setup:

In this setup, we can see the direct exchange X with two queues bound to it. The first queue is bound with binding key orange, and the second has two bindings, one with binding key black and the other one with green.

In such a setup a message published to the exchange with a routing key orange will be routed to queue Q1. Messages with a routing key of black or green will go to Q2. All other messages will be discarded.

Multiple bindings

It is perfectly legal to bind multiple queues with the same binding key. In our example we could add a binding between X and Q1 with binding key black. In that case, the direct exchange will behave like fanout and will broadcast the message to all the matching queues. A message with routing key black will be delivered to both Q1 and Q2.

Publishing messages

We'll use this model for our routing system. Instead of fanout we'll send messages to a direct exchange. We will supply the color as a routing key. That way the receiving program will be able to select the color it wants to receive (or subscribe to). Let's focus on sending messages first.

As always, we do some spring boot configuration in Tut4Config:

@Bean
public DirectExchange direct() {
    return new DirectExchange("tut.direct");
}

And we're ready to send a message. Colors, as in the diagram, can be one of 'orange', 'black', or 'green'.

Subscribing

Receiving messages will work just like in the previous tutorial, with one exception - we're going to create a new binding for each color we're interested in. This also goes into the Tut4Config:

@Bean
public DirectExchange direct() {
    return new DirectExchange("tut.direct");
}
...
@Bean
public Binding binding1a(DirectExchange direct,
    Queue autoDeleteQueue1) {
    return BindingBuilder.bind(autoDeleteQueue1)
        .to(direct)
        .with("orange");
}

Putting it all together

As in the previous tutorials, create a new package for this tutorial called tut4 and create the Tut4Config class. The code for Tut4Config.java class:

import org.springframework.amqp.core.*;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
import org.springframework.context.annotation.Profile;

@Profile({"tut4","routing"})
@Configuration
public class Tut4Config {

	@Bean
	public DirectExchange direct() {
		return new DirectExchange("tut.direct");
	}

	@Profile("receiver")
	private static class ReceiverConfig {

		@Bean
		public Queue autoDeleteQueue1() {
			return new AnonymousQueue();
		}

		@Bean
		public Queue autoDeleteQueue2() {
			return new AnonymousQueue();
		}

		@Bean
		public Binding binding1a(DirectExchange direct,
		    Queue autoDeleteQueue1) {
			return BindingBuilder.bind(autoDeleteQueue1)
			    .to(direct)
			    .with("orange");
		}

		@Bean
		public Binding binding1b(DirectExchange direct,
		    Queue autoDeleteQueue1) {
			return BindingBuilder.bind(autoDeleteQueue1)
			    .to(direct)
			    .with("black");
		}

		@Bean
		public Binding binding2a(DirectExchange direct,
		    Queue autoDeleteQueue2) {
			return BindingBuilder.bind(autoDeleteQueue2)
			    .to(direct)
			    .with("green");
		}

		@Bean
		public Binding binding2b(DirectExchange direct,
		    Queue autoDeleteQueue2) {
			return BindingBuilder.bind(autoDeleteQueue2)
			    .to(direct)
			    .with("black");
		}

		@Bean
		public Tut4Receiver receiver() {
	 	 	return new Tut4Receiver();
		}
	}

	@Profile("sender")
	@Bean
	public Tut4Sender sender() {
		return new Tut4Sender();
	}
}

The code for our sender class is:

package org.springframework.amqp.tutorials.tut4;

import org.springframework.amqp.core.DirectExchange;
import org.springframework.amqp.rabbit.core.RabbitTemplate;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.scheduling.annotation.Scheduled;
import java.util.concurrent.atomic.AtomicInteger;

public class Tut4Sender {

	@Autowired
	private RabbitTemplate template;

	@Autowired
	private DirectExchange direct;

	AtomicInteger index = new AtomicInteger(0);

	AtomicInteger count = new AtomicInteger(0);

	private final String[] keys = {"orange", "black", "green"};

	@Scheduled(fixedDelay = 1000, initialDelay = 500)
	public void send() {
		StringBuilder builder = new StringBuilder("Hello to ");
		if (this.index.incrementAndGet() == 3) {
			this.index.set(0);
		}
		String key = keys[this.index.get()];
		builder.append(key).append(' ');
		builder.append(this.count.get());
		String message = builder.toString();
		template.convertAndSend(direct.getName(), key, message);
		System.out.println(" [x] Sent '" + message + "'");
	}

}

The code for Tut4Receiver.java is:

import org.springframework.amqp.rabbit.annotation.RabbitListener;
import org.springframework.util.StopWatch;

public class Tut4Receiver {

	@RabbitListener(queues = "#{autoDeleteQueue1.name}")
	public void receive1(String in) throws InterruptedException {
		receive(in, 1);
	}

	@RabbitListener(queues = "#{autoDeleteQueue2.name}")
	public void receive2(String in) throws InterruptedException {
		receive(in, 2);
	}

	public void receive(String in, int receiver) throws InterruptedException {
		StopWatch watch = new StopWatch();
		watch.start();
		System.out.println("instance " + receiver + " [x] Received '" + in + "'");
		doWork(in);
		watch.stop();
		System.out.println("instance " + receiver + " [x] Done in " +
		    watch.getTotalTimeSeconds() + "s");
	}

	private void doWork(String in) throws InterruptedException {
		for (char ch : in.toCharArray()) {
			if (ch == '.') {
				Thread.sleep(1000);
			}
		}
	}

}

Compile as usual (see tutorial one for maven compilation and executing the options from the jar).

./mvnw clean package

In one terminal window you can run:

java -jar target/rabbitmq-tutorials.jar \
    --spring.profiles.active=routing,receiver \
    --tutorial.client.duration=60000

and in the other terminal window run the sender:

java -jar target/rabbitmq-tutorials.jar \
    --spring.profiles.active=routing,sender \
    --tutorial.client.duration=60000

Full source code for Tut4Receiver.java source and Tut4Sender.java source. The configuration is in Tut4Config.java source.

Move on to tutorial 5 to find out how to listen for messages based on a pattern.

RabbitMQ tutorial - Routing

Routing​

(using Spring AMQP)​

Prerequisites​

Where to get help​

Bindings​

Direct exchange​

Multiple bindings​

Publishing messages​

Subscribing​

Putting it all together​