Java Client API Guide

Overview

This guide covers RabbitMQ Java client and its public API. It assumes that the most recent major version of the client is used and the reader is familiar with the basics.

Key sections of the guide are:

Licensing
JDK and Android versions supported
Support Timeline
Connecting to RabbitMQ
Connection and Channel Lifespan
Client-provided connection name
Using Exchanges and Queues
Publishing Messages
Consuming Using a Subscription
Concurrency Considerations and Safety
Automatic Recovery From Network Failures
Unhandled Exceptions in consumers
Metrics and Monitoring
Endpoint Resolution with the AddressResolver Interface
The Request/Response Pattern ("RPC")
TLS support
OAuth 2 support

An API reference (JavaDoc) is available separately.

Support Timeline

Please see the RabbitMQ Java libraries support page for the support timeline.

JDK and Android Version Support

5.x release series of this library require JDK 8, both for compilation and at runtime. On Android, this means only Android 7.0 or later versions are supported.

4.x release series support JDK 6 and Android versions prior to 7.0.

License

The library is open source, developed on GitHub, and is triple-licensed under

This means that the user can consider the library to be licensed under any of the licenses from the list above. For example, the user may choose the Apache Public License 2.0 and include this client into a commercial product. Codebases that are licensed under the GPLv2 may choose GPLv2, and so on.

Overview

The client API exposes key entities in the AMQP 0-9-1 protocol model, with additional abstractions for ease of use.

RabbitMQ Java client uses com.rabbitmq.client as its top-level package. The key classes and interfaces are:

Channel: represents an AMQP 0-9-1 channel, and provides most of the operations (protocol methods).
Connection: represents an AMQP 0-9-1 connection
ConnectionFactory: constructs Connection instances
Consumer: represents a message consumer
DefaultConsumer: commonly used base class for consumers
BasicProperties: message properties (metadata)
BasicProperties.Builder: builder for BasicProperties

Protocol operations are available through the Channel interface. Connection is used to open channels, register connection lifecycle event handlers, and close connections that are no longer needed. Connections are instantiated through ConnectionFactory, which is how you configure various connection settings, such as the vhost or username.

Connections and Channels

The core API classes are Connection and Channel, representing an AMQP 0-9-1 connection and channel, respectively. They are typically imported before used:

import com.rabbitmq.client.Connection;
import com.rabbitmq.client.Channel;

Connecting to RabbitMQ

The following code connects to a RabbitMQ node using the given parameters (host name, port number, etc):

ConnectionFactory factory = new ConnectionFactory();
// "guest"/"guest" by default, limited to localhost connections
factory.setUsername(userName);
factory.setPassword(password);
factory.setVirtualHost(virtualHost);
factory.setHost(hostName);
factory.setPort(portNumber);

Connection conn = factory.newConnection();

All of these parameters have sensible defaults for a RabbitMQ node running locally.

The default value for a property will be used if the property remains unassigned prior to creating a connection:

Property	Default Value
Username	`"guest"`
Password	`"guest"`
Virtual host	`"/"`
Hostname	`"localhost"`
port	`5672` for regular connections, `5671` for connections that use TLS

Connecting Using a URI

Alternatively, URIs may be used:

ConnectionFactory factory = new ConnectionFactory();
factory.setUri("amqp://userName:password@hostName:portNumber/virtualHost");
Connection conn = factory.newConnection();

All of these parameters have sensible defaults for a stock RabbitMQ server running locally.

Successful and unsuccessful client connection events can be observed in server node logs.

Note that user guest can only connect from localhost by default. This is to limit well-known credential use in production systems.

Application developers can assign a custom name to a connection. If set, the name will be mentioned in RabbitMQ node logs as well as management UI.

The Connection interface can then be used to open a channel:

Channel channel = conn.createChannel();

The channel can now be used to send and receive messages, as described in subsequent sections.

Using Lists of Endpoints

It is possible to specify a list of endpoints to use when connecting. The first reachable endpoint will be used. In case of connection failures, using a list of endpoints makes it possible for the application to connect to a different node if the original one is down.

To use multiple of endpoint, provide a list of Addresses to ConnectionFactory#newConnection. An Address represents a hostname and port pair.

Address[] addrArr = new Address[]{ new Address(hostname1, portnumber1)
                                 , new Address(hostname2, portnumber2)};
Connection conn = factory.newConnection(addrArr);

will attempt to connect to hostname1:portnumber1, and if that fails to hostname2:portnumber2. The connection returned is the first in the array that succeeds (without throwing IOException). This is entirely equivalent to repeatedly setting host and port on a factory, calling factory.newConnection() each time, until one of them succeeds.

If an ExecutorService is provided as well (using the form factory.newConnection(es, addrArr)) the thread pool is associated with the (first) successful connection.

If you want more control over the host to connect to, see the support for service discovery.

Disconnecting from RabbitMQ

To disconnect, simply close the channel and the connection:

channel.close();
conn.close();

Note that closing the channel may be considered good practice, but is not strictly necessary here - it will be done automatically anyway when the underlying connection is closed.

Client disconnection events can be observed in server node logs.

Connection and Channel Lifespan

Client connections are meant to be long-lived. The underlying protocol is designed and optimized for long running connections. That means that opening a new connection per operation, e.g. a message published, is unnecessary and strongly discouraged as it will introduce a lot of network roundtrips and overhead.

Channels are also meant to be long-lived but since many recoverable protocol errors will result in channel closure, channel lifespan could be shorter than that of its connection. Closing and opening new channels per operation is usually unnecessary but can be appropriate. When in doubt, consider reusing channels first.

Channel-level exceptions such as attempts to consume from a queue that does not exist will result in channel closure. A closed channel can no longer be used and will not receive any more events from the server (such as message deliveries). Channel-level exceptions will be logged by RabbitMQ and will initiate a shutdown sequence for the channel (see below).

Client-Provided Connection Name

RabbitMQ nodes have a limited amount of information about their clients:

their TCP endpoint (source IP address and port)
the credentials used

This information alone can make identifying applications and instances problematic, in particular when credentials can be shared and clients connect over a load balancer but Proxy protocol cannot be enabled.

To make it easier to identify clients in server logs and management UI, AMQP 0-9-1 client connections, including the RabbitMQ Java client, can provide a custom identifier. If set, the identifier will be mentioned in log entries and management UI. The identifier is known as the client-provided connection name. The name can be used to identify an application or a specific component within an application. The name is optional; however, developers are strongly encouraged to provide one as it would significantly simplify certain operational tasks.

RabbitMQ Java client's ConnectionFactory#newConnection method overrides accept a client-provided connection name. Here's a modified connection example used above which provides such a name:

ConnectionFactory factory = new ConnectionFactory();
factory.setUri("amqp://userName:password@hostName:portNumber/virtualHost");
// provides a custom connection name
Connection conn = factory.newConnection("app:audit component:event-consumer");

Using Exchanges and Queues

Client applications work with [exchanges] and queues, the high-level building blocks of the protocol. These must be declared before they can be used. Declaring either type of object simply ensures that one of that name exists, creating it if necessary.

Continuing the previous example, the following code declares an exchange and a server-named queue, then binds them together.

channel.exchangeDeclare(exchangeName, "direct", true);
String queueName = channel.queueDeclare().getQueue();
channel.queueBind(queueName, exchangeName, routingKey);

This will actively declare the following objects, both of which can be customised by using additional parameters. Here neither of them have any special arguments.

a durable, non-autodelete exchange of "direct" type
a non-durable, exclusive, autodelete queue with a generated name

The above function calls then bind the queue to the exchange with the given routing key.

Note that this would be a typical way to declare a queue when only one client wants to work with it: it doesn't need a well-known name, no other client can use it (exclusive) and will be cleaned up automatically (autodelete). If several clients want to share a queue with a well-known name, this code would be appropriate:

channel.exchangeDeclare(exchangeName, "direct", true);
channel.queueDeclare(queueName, true, false, false, null);
channel.queueBind(queueName, exchangeName, routingKey);

This will actively declare:

a durable, non-autodelete exchange of "direct" type
a durable, non-exclusive, non-autodelete queue with a well-known name

Many Channel API methods are overloaded. These convenient short forms of exchangeDeclare, queueDeclare and queueBind use sensible defaults. There are also longer forms with more parameters, to let you override these defaults as necessary, giving full control where needed.

This "short form, long form" pattern is used throughout the client API uses.

Passive Declaration

Queues and exchanges can be declared "passively". A passive declare simply checks that the entity with the provided name exists. If it does, the operation is a no-op. For queues successful passive declares will return the same information as non-passive ones, namely the number of consumers and messages in ready state in the queue.

If the entity does not exist, the operation fails with a channel level exception. The channel cannot be used after that. A new channel should be opened. It is common to use one-off (temporary) channels for passive declarations.

Channel#queueDeclarePassive and Channel#exchangeDeclarePassive are the methods used for passive declaration. The following example demonstrates Channel#queueDeclarePassive:

Queue.DeclareOk response = channel.queueDeclarePassive("queue-name");
// returns the number of messages in Ready state in the queue
response.getMessageCount();
// returns the number of consumers the queue has
response.getConsumerCount();

Channel#exchangeDeclarePassive's return value contains no useful information. Therefore if the method returns and no channel exceptions occurs, it means that the exchange does exist.

Operations with Optional Responses

Some common operations also have a "no wait" version which won't wait for server response. For example, to declare a queue and instruct the server to not send any response, use

channel.queueDeclareNoWait(queueName, true, false, false, null);

The "no wait" versions are more efficient but offer lower safety guarantees, e.g. they are more dependent on the heartbeat mechanism for detection of failed operations. When in doubt, start with the standard version. The "no wait" versions are only needed in scenarios with high topology (queue, binding) churn.

Deleting Entities and Purging Messages

A queue or exchange can be explicitly deleted:

channel.queueDelete("queue-name")

It is possible to delete a queue only if it is empty:

channel.queueDelete("queue-name", false, true)

or if it is not used (does not have any consumers):

channel.queueDelete("queue-name", true, false)

A queue can be purged (all of its messages deleted):

channel.queuePurge("queue-name")

Publishing Messages

To publish a message to an exchange, use Channel.basicPublish as follows:

byte[] messageBodyBytes = "Hello, world!".getBytes();
channel.basicPublish(exchangeName, routingKey, null, messageBodyBytes);

For fine control, use overloaded variants to specify the mandatory flag, or send messages with pre-set message properties (see the Publishers guide for details):

channel.basicPublish(exchangeName, routingKey, mandatory,
                     MessageProperties.PERSISTENT_TEXT_PLAIN,
                     messageBodyBytes);

This sends a message with delivery mode 2 (persistent), priority 1 and content-type "text/plain". Use the Builder class to build a message properties object with as many properties as needed, for example:

channel.basicPublish(exchangeName, routingKey,
             new AMQP.BasicProperties.Builder()
               .contentType("text/plain")
               .deliveryMode(2)
               .priority(1)
               .userId("bob")
               .build(),
               messageBodyBytes);

This example publishes a message with custom headers:

Map<String, Object> headers = new HashMap<String, Object>();
headers.put("latitude",  51.5252949);
headers.put("longitude", -0.0905493);

channel.basicPublish(exchangeName, routingKey,
             new AMQP.BasicProperties.Builder()
               .headers(headers)
               .build(),
               messageBodyBytes);

This example publishes a message with expiration:

channel.basicPublish(exchangeName, routingKey,
             new AMQP.BasicProperties.Builder()
               .expiration("60000")
               .build(),
               messageBodyBytes);

This is just a brief set of examples that does not demonstrate every supported property.

Note that BasicProperties is an inner class of an outer class, AMQP.

Invocations of Channel#basicPublish will eventually block if a resource-driven alarm is in effect.

Channels and Concurrency Considerations (Thread Safety)

Sharing Channel instances between threads should be avoided. Applications should be using a Channel per thread instead of sharing the same Channel across multiple threads.

While some operations on channels are safe to invoke concurrently, some are not and will result in incorrect frame interleaving on the wire, double acknowledgements and so on.

Concurrent publishing on a shared channel can result in incorrect frame interleaving on the wire, triggering a connection-level protocol exception and immediate connection closure by the broker. It therefore requires explicit synchronization in application code (Channel#basicPublish must be invoked in a critical section). Sharing channels between threads will also interfere with Publisher Confirms. Concurrent publishing on a shared channel is best avoided entirely, e.g. by using a channel per thread.

It is possible to use channel pooling to avoid concurrent publishing on a shared channel: once a thread is done working with a channel, it returns it to the pool, making the channel available for another thread. Channel pooling can be thought of as a specific synchronization solution. It is recommended that an existing pooling library is used instead of a homegrown solution. For example, Spring AMQP which comes with a ready-to-use channel pooling feature.

Channels consume resources and in most cases applications very rarely need more than a few hundreds open channels in the same JVM process. If we assume that the application has a thread for each channel (as channel shouldn't be used concurrently), thousands of threads for a single JVM is already a fair amount of overhead that likely can be avoided. Moreover a few fast publishers can easily saturate a network interface and a broker node: publishing involves less work than routing, storing and delivering messages.

A classic anti-pattern to be avoided is opening a channel for each published message. Channels are supposed to be reasonably long-lived and opening a new one is a network round-trip which makes this pattern extremely inefficient.

Consuming in one thread and publishing in another thread on a shared channel can be safe.

Server-pushed deliveries (see the section below) are dispatched concurrently with a guarantee that per-channel ordering is preserved. The dispatch mechanism uses a java.util.concurrent.ExecutorService, one per connection. It is possible to provide a custom executor that will be shared by all connections produced by a single ConnectionFactory using the ConnectionFactory#setSharedExecutor setter.

When manual acknowledgements are used, it is important to consider what thread does the acknowledgement. If it's different from the thread that received the delivery (e.g. Consumer#handleDelivery delegated delivery handling to a different thread), acknowledging with the multiple parameter set to true is unsafe and will result in double-acknowledgements, and therefore a channel-level protocol exception that closes the channel. Acknowledging a single message at a time can be safe.

Receiving Messages by Subscription ("Push API")

import com.rabbitmq.client.Consumer;
import com.rabbitmq.client.DefaultConsumer;

The most efficient way to receive messages is to set up a subscription using the Consumer interface. The messages will then be delivered automatically as they arrive, rather than having to be explicitly requested.

When calling the API methods relating to Consumers, individual subscriptions are always referred to by their consumer tags. A consumer tag is a consumer identifier which can be either client- or server-generated. To let RabbitMQ generate a node-wide unique tag, use a Channel#basicConsume override that doesn't take a consumer tag argument or pass an empty string for consumer tag and use the value returned by Channel#basicConsume. Consumer tags are used to cancel consumers.

Distinct Consumer instances must have distinct consumer tags. Duplicate consumer tags on a connection is strongly discouraged and can lead to issues with automatic connection recovery and confusing monitoring data when consumers are monitored.

The easiest way to implement a Consumer is to subclass the convenience class DefaultConsumer. An object of this subclass can be passed on a basicConsume call to set up the subscription:

boolean autoAck = false;
channel.basicConsume(queueName, autoAck, "myConsumerTag",
     new DefaultConsumer(channel) {
         @Override
         public void handleDelivery(String consumerTag,
                                    Envelope envelope,
                                    AMQP.BasicProperties properties,
                                    byte[] body)
             throws IOException
         {
             String routingKey = envelope.getRoutingKey();
             String contentType = properties.getContentType();
             long deliveryTag = envelope.getDeliveryTag();
             <i>// (process the message components here ...)</i>
             channel.basicAck(deliveryTag, false);
         }
     });

Here, since we specified autoAck = false, it is necessary to acknowledge messages delivered to the Consumer, most conveniently done in the handleDelivery method, as illustrated.

More sophisticated Consumers will need to override further methods. In particular, handleShutdownSignal is called when channels and connections close, and handleConsumeOk is passed the consumer tag before any other callbacks to that Consumer are called.

Consumers can also implement the handleCancelOk and handleCancel methods to be notified of explicit and implicit cancellations, respectively.

You can explicitly cancel a particular Consumer with Channel.basicCancel:

channel.basicCancel(consumerTag);

passing the consumer tag.

Just like with publishers, it is important to consider concurrency hazard safety for consumers.

Callbacks to Consumers are dispatched in a thread pool separate from the thread that instantiated its Channel. This means that Consumers can safely call blocking methods on the Connection or Channel, such as Channel#queueDeclare or Channel#basicCancel.

Each Channel will dispatch all deliveries to its Consumer handler methods on it in order they were sent by RabbitMQ. Ordering of deliveries between channels is not guaranteed: those deliveries can be dispatched in parallel.

For the most common use case of one Consumer per Channel, this means Consumers do not hold up other Consumers. With multiple Consumers per Channel be aware that a long-running Consumer may hold up dispatch of callbacks to other Consumers on that Channel.

Please refer to the Concurrency Considerations (Thread Safety) section for other topics related to concurrency and concurrency hazard safety.

Retrieving Individual Messages ("Pull API")

It is also possible to retrieve individual messages on demand ("pull API" a.k.a. polling). This approach to consumption is highly inefficient as it is effectively polling and applications repeatedly have to ask for results even if the vast majority of the requests yield no results. Therefore using this approach is highly discouraged.

To "pull" a message, use the Channel.basicGet method. The returned value is an instance of GetResponse, from which the header information (properties) and message body can be extracted:

boolean autoAck = false;
GetResponse response = channel.basicGet(queueName, autoAck);
if (response == null) {
    // No message retrieved.
} else {
    AMQP.BasicProperties props = response.getProps();
    byte[] body = response.getBody();
    long deliveryTag = response.getEnvelope().getDeliveryTag();
    // ...

and since this example uses manual acknowledgements (the autoAck = false above), you must also call Channel.basicAck to acknowledge that you have successfully received the message:

// ...
channel.basicAck(method.deliveryTag, false); // acknowledge receipt of the message
}

Handling unroutable messages

If a message is published with the "mandatory" flags set, but cannot be routed, the broker will return it to the sending client (via an AMQP.Basic.Return command).

To be notified of such returns, clients can implement the ReturnListener interface and call Channel.addReturnListener. If the client has not configured a return listener for a particular channel, then the associated returned messages will be silently dropped.

channel.addReturnListener(new ReturnListener() {
    public void handleReturn(int replyCode,
                                  String replyText,
                                  String exchange,
                                  String routingKey,
                                  AMQP.BasicProperties properties,
                                  byte[] body)
    throws IOException {
        ...
    }
});

A return listener will be called, for example, if the client publishes a message with the "mandatory" flag set to an exchange of "direct" type which is not bound to a queue.

Shutdown Protocol

Overview of the Client Shutdown Process

The AMQP 0-9-1 connection and channel share the same general approach to managing network failure, internal failure, and explicit local shutdown.

The AMQP 0-9-1 connection and channel have the following lifecycle states:

open: the object is ready to use
closing: the object has been explicitly notified to shut down locally, has issued a shutdown request to any supporting lower-layer objects, and is waiting for their shutdown procedures to complete
closed: the object has received all shutdown-complete notification(s) from any lower-layer objects, and as a consequence has shut itself down

Those objects always end up in the closed state, regardless of the reason that caused the closure, like an application request, an internal client library failure, a remote network request or network failure.

The connection and channel objects possess the following shutdown-related methods:

addShutdownListener(ShutdownListener listener) and
removeShutdownListener(ShutdownListener listener), to manage any listeners, which will be fired when the object transitions to closed state. Note that, adding a ShutdownListener to an object that is already closed will fire the listener immediately
getCloseReason(), to allow the investigation of what was the reason of the object's shutdown
isOpen(), useful for testing whether the object is in an open state
close(int closeCode, String closeMessage), to explicitly notify the object to shut down

Simple usage of listeners would look like:

import com.rabbitmq.client.ShutdownSignalException;
import com.rabbitmq.client.ShutdownListener;

connection.addShutdownListener(new ShutdownListener() {
    public void shutdownCompleted(ShutdownSignalException cause)
    {
        ...
    }
});

Information about the circumstances of a shutdown

One can retrieve the ShutdownSignalException, which contains all the information available about the close reason, either by explicitly calling the getCloseReason() method or by using the cause parameter in the service(ShutdownSignalException cause) method of the ShutdownListener class.

The ShutdownSignalException class provides methods to analyze the reason of the shutdown. By calling the isHardError() method we get information whether it was a connection or a channel error, and getReason() returns information about the cause, in the form an AMQP method - either AMQP.Channel.Close or AMQP.Connection.Close (or null if the cause was some exception in the library, such as a network communication failure, in which case that exception can be retrieved with getCause()).

public void shutdownCompleted(ShutdownSignalException cause)
{
  if (cause.isHardError())
  {
    Connection conn = (Connection)cause.getReference();
    if (!cause.isInitiatedByApplication())
    {
      Method reason = cause.getReason();
      ...
    }
    ...
  } else {
    Channel ch = (Channel)cause.getReference();
    ...
  }
}

Atomicity and use of the isOpen() method

Use of the isOpen() method of channel and connection objects is not recommended for production code, because the value returned by the method is dependent on the existence of the shutdown cause. The following code illustrates the possibility of race conditions:

public void brokenMethod(Channel channel)
{
    if (channel.isOpen())
    {
        // The following code depends on the channel being in open state.
        // However there is a possibility of the change in the channel state
        // between isOpen() and basicQos(1) call
        ...
        channel.basicQos(1);
    }
}

Instead, we should normally ignore such checking, and simply attempt the action desired. If during the execution of the code the channel of the connection is closed, a ShutdownSignalException will be thrown indicating that the object is in an invalid state. We should also catch for IOException caused either by SocketException, when broker closes the connection unexpectedly, or ShutdownSignalException, when broker initiated clean close.

public void validMethod(Channel channel)
{
    try {
        ...
        channel.basicQos(1);
    } catch (ShutdownSignalException sse) {
        // possibly check if channel was closed
        // by the time we started action and reasons for
        // closing it
        ...
    } catch (IOException ioe) {
        // check why connection was closed
        ...
    }
}

Advanced Connection options

Consumer Operation Thread Pool

Consumer threads (see Receiving below) are automatically allocated in a new ExecutorService thread pool by default. If greater control is required supply an ExecutorService on the newConnection() method, so that this pool of threads is used instead. Here is an example where a larger thread pool is supplied than is normally allocated:

ExecutorService es = Executors.newFixedThreadPool(20);
Connection conn = factory.newConnection(es);

Both Executors and ExecutorService classes are in the java.util.concurrent package.

When the connection is closed a default ExecutorService will be shutdown(), but a user-supplied ExecutorService (like es above) will not be shutdown(). Clients that supply a custom ExecutorService must ensure it is shutdown eventually (by calling its shutdown() method), or else the pool's threads may prevent JVM termination.

The same executor service may be shared between multiple connections, or serially re-used on re-connection but it cannot be used after it is shutdown().

Use of this feature should only be considered if there is evidence that there is a severe bottleneck in the processing of Consumer callbacks. If there are no Consumer callbacks executed, or very few, the default allocation is more than sufficient. The overhead is initially minimal and the total thread resources allocated are bounded, even if a burst of consumer activity may occasionally occur.

Service discovery with the AddressResolver interface

It is possible to use an implementation of AddressResolver to change the endpoint resolution algorithm used at connection time:

Connection conn = factory.newConnection(addressResolver);

The AddressResolver interface is like the following:

public interface AddressResolver {

  List&lt;Address&gt; getAddresses() throws IOException;

}

Just like with a list of endpoints, the first Address returned will be tried first, then the second if the client fails to connect to the first, and so on.

If an ExecutorService is provided as well (using the form factory.newConnection(es, addressResolver)) the thread pool is associated with the (first) successful connection.

The AddressResolver is the perfect place to implement custom service discovery logic, which is especially useful in a dynamic infrastructure. Combined with automatic recovery, the client can automatically connect to nodes that weren't even up when it was first started. Affinity and load balancing are other scenarios where a custom AddressResolver could be useful.

The Java client ships with the following implementations (see the javadoc for details):

DnsRecordIpAddressResolver: given the name of a host, returns its IP addresses (resolution against the platform DNS server). This can be useful for simple DNS-based load balancing or failover.
DnsSrvRecordAddressResolver: given the name of a service, returns hostname/port pairs. The search is implemented as a DNS SRV request. This can be useful when using a service registry like HashiCorp Consul.

Heartbeat Timeout

See the Heartbeats guide for more information about heartbeats and how to configure them in the Java client.

Custom Thread Factories

Environments such as Google App Engine (GAE) can restrict direct thread instantiation. To use RabbitMQ Java client in such environments, it's necessary to configure a custom ThreadFactory that uses an appropriate method to instantiate threads, e.g. GAE's ThreadManager.

Below is an example for Google App Engine.

import com.google.appengine.api.ThreadManager;

ConnectionFactory cf = new ConnectionFactory();
cf.setThreadFactory(ThreadManager.backgroundThreadFactory());

Support for Java non-blocking IO

Version 4.0 of the Java client brings support for Java non-blocking IO (a.k.a Java NIO). NIO isn't supposed to be faster than blocking IO, it simply allows to control resources (in this case, threads) more easily.

With the default blocking IO mode, each connection uses a thread to read from the network socket. With the NIO mode, you can control the number of threads that read and write from/to the network socket.

Use the NIO mode if your Java process uses many connections (dozens or hundreds). You should use fewer threads than with the default blocking mode. With the appropriate number of threads set, you shouldn't experience any decrease in performance, especially if the connections are not so busy.

NIO must be enabled explicitly:

ConnectionFactory connectionFactory = new ConnectionFactory();
connectionFactory.useNio();

The NIO mode can be configured through the NioParams class:

  connectionFactory.setNioParams(new NioParams().setNbIoThreads(4));

The NIO mode uses reasonable defaults, but you may need to change them according to your own workload. Some of the settings are: the total number of IO threads used, the size of buffers, a service executor to use for the IO loops, parameters for the in-memory write queue (write requests are enqueued before being sent on the network). Please read the Javadoc for details and defaults.

Automatic Recovery From Network Failures

Connection Recovery

Network connection between clients and RabbitMQ nodes can fail. RabbitMQ Java client supports automatic recovery of connections and topology (queues, exchanges, bindings, and consumers).

The automatic recovery process for many applications follows the following steps:

Reconnect
Restore connection listeners
Re-open channels
Restore channel listeners
Restore channel basic.qos setting, publisher confirms and transaction settings

Topology recovery includes the following actions, performed for every channel

Re-declare exchanges (except for predefined ones)
Re-declare queues
Recover all bindings
Recover all consumers

As of version 4.0.0 of the Java client, automatic recovery is enabled by default (and thus topology recovery as well).

To disable or enable automatic connection recovery, use the factory.setAutomaticRecoveryEnabled(boolean) method. The following snippet shows how to explicitly enable automatic recovery (e.g. for Java client prior 4.0.0):

ConnectionFactory factory = new ConnectionFactory();
factory.setUsername(userName);
factory.setPassword(password);
factory.setVirtualHost(virtualHost);
factory.setHost(hostName);
factory.setPort(portNumber);
factory.setAutomaticRecoveryEnabled(true);
// connection that will recover automatically
Connection conn = factory.newConnection();

If recovery fails due to an exception (e.g. RabbitMQ node is still not reachable), it will be retried after a fixed time interval (default is 5 seconds). The interval can be configured:

ConnectionFactory factory = new ConnectionFactory();
// attempt recovery every 10 seconds
factory.setNetworkRecoveryInterval(10000);

When a list of addresses is provided, the list is shuffled and all addresses are tried, one after the next:

ConnectionFactory factory = new ConnectionFactory();

Address[] addresses = {new Address("192.168.1.4"), new Address("192.168.1.5")};
factory.newConnection(addresses);

When Will Connection Recovery Be Triggered?

Automatic connection recovery, if enabled, will be triggered by the following events:

An I/O exception is thrown in connection's I/O loop
A socket read operation times out
Missed server heartbeats are detected
Any other unexpected exception is thrown in connection's I/O loop

whichever happens first.

If initial client connection to a RabbitMQ node fails, automatic connection recovery won't kick in. Applications developers are responsible for retrying such connections, logging failed attempts, implementing a limit to the number of retries and so on. Here's a very basic example:

ConnectionFactory factory = new ConnectionFactory();
// configure various connection settings

try {
  Connection conn = factory.newConnection();
} catch (java.net.ConnectException e) {
  Thread.sleep(5000);
  // apply retry logic
}

When a connection is closed by the application via the Connection.Close method, connection recovery will not be initiated.

Channel-level exceptions will not trigger any kind of recovery as they usually indicate a semantic issue in the application (e.g. an attempt to consume from a non-existent queue).

Recovery Listeners

It is possible to register one or more recovery listeners on recoverable connections and channels. When connection recovery is enabled, connections returned by ConnectionFactory#newConnection and Connection#createChannel implement com.rabbitmq.client.Recoverable, providing two methods with fairly descriptive names:

addRecoveryListener
removeRecoveryListener

Note that you currently need to cast connections and channels to Recoverable in order to use those methods.

Effects on Publishing

Messages that are published using Channel.basicPublish when connection is down will be lost. The client does not enqueue them for delivery after connection has recovered. To ensure that published messages reach RabbitMQ applications need to use Publisher Confirms and account for connection failures.

Topology Recovery

Topology recovery involves recovery of exchanges, queues, bindings and consumers. It is enabled by default when automatic recovery is enabled. Topology recovery is enabled by default in modern versions of the client.

Topology recovery can be disabled explicitly if needed:

ConnectionFactory factory = new ConnectionFactory();

Connection conn = factory.newConnection();
// enable automatic recovery (e.g. Java client prior 4.0.0)
factory.setAutomaticRecoveryEnabled(true);
// disable topology recovery
factory.setTopologyRecoveryEnabled(false);

Failure Detection and Recovery Limitations

Automatic connection recovery has a number of limitations and intentional design decisions that applications developers need to be aware of.

Topology recovery relies on a per-connection cache of entities (queues, exchanges, bindings, consumers). When, say, a queue is declared on a connection, it will be added to the cache. When it is deleted or is scheduled for deletion (e.g. because it is auto-deleted) it will be removed. This makes it possible to declare and delete entities on different channels without having unexpected results. It also means that consumer tags (a channel-specific identifier) must be unique across all channels on connections that use automatic connection recovery.

When a connection is down or lost, it takes time to detect. Therefore there is a window of time in which both the library and the application are unaware of effective connection failure. Any messages published during this time frame are serialised and written to the TCP socket as usual. Their delivery to the broker can only be guaranteed via publisher confirms: publishing in AMQP 0-9-1 is entirely asynchronous by design.

When a socket or I/O operation error is detected by a connection with automatic recovery enabled, recovery begins after a configurable delay, 5 seconds by default. This design assumes that even though a lot of network failures are transient and generally short lived, they do not go away in an instant. Having a delay also avoids an inherent race condition between server-side resource cleanup (such as exclusive or auto-delete queue deletion) and operations performed on a newly opened connection on the same resources.

Connection recovery attempts by default will continue at identical time intervals until a new connection is successfully opened. Recovery delay can be made dynamic by providing a RecoveryDelayHandler implementation instance to ConnectionFactory#setRecoveryDelayHandler. Implementations that use dynamically computed delay intervals should avoid values that are too low (such as values that are lower than 2 seconds).

When a connection is in the recovering state, any publishes attempted on its channels will be rejected with an exception. The client currently does not perform any internal buffering of such outgoing messages. It is an application developer's responsibility to keep track of such messages and republish them when recovery succeeds. Publisher confirms is a protocol extension that should be used by publishers that cannot afford message loss.

Connection recovery will not kick in when a channel is closed due to a channel-level exception. Such exceptions often indicate application-level issues. The library cannot make an informed decision about when that's the case.

Closed channels won't be recovered even after connection recovery kicks in. This includes both explicitly closed channels and the channel-level exception case above.

Manual Acknowledgements and Automatic Recovery

When manual acknowledgements are used, it is possible that network connection to RabbitMQ node fails between message delivery and acknowledgement. After connection recovery, RabbitMQ will reset delivery tags on all channels.

This means that basic.ack, basic.nack, and basic.reject with old delivery tags will cause a channel exception. To avoid this, RabbitMQ Java client keeps track of and updates delivery tags to make them monotonically growing between recoveries.

Channel.basicAck, Channel.basicNack, and Channel.basicReject then translate adjusted delivery tags into those used by RabbitMQ.

Acknowledgements with stale delivery tags will not be sent. Applications that use manual acknowledgements and automatic recovery must be capable of handling redeliveries.

Channels Lifecycle and Topology Recovery

Automatic connection recovery is meant to be as transparent as possible for the application developer, that's why Channel instances remain the same even if several connections fail and recover behind the scenes. Technically, when automatic recovery is on, Channel instances act as proxies or decorators: they delegate the AMQP business to an actual AMQP channel implementation and implement some recovery machinery around it. That is why you shouldn't close a channel after it has created some resources (queues, exchanges, bindings) or topology recovery for those resources will fail later, as the channel has been closed. Instead, leave creating channels open for the life of the application.

Unhandled Exceptions

Unhandled exceptions related to connection, channel, recovery, and consumer lifecycle are delegated to the exception handler. Exception handler is any object that implements the ExceptionHandler interface. By default, an instance of DefaultExceptionHandler is used. It prints exception details to the standard output.

It is possible to override the handler using ConnectionFactory#setExceptionHandler. It will be used for all connections created by the factory:

ConnectionFactory factory = new ConnectionFactory();
cf.setExceptionHandler(customHandler);

Exception handlers should be used for exception logging.

Metrics and Monitoring

The client collects runtime metrics (e.g. number of published messages) for active connections. Metric collection is optional feature that should be set up at the ConnectionFactory level, using the setMetricsCollector(metricsCollector) method. This method expects a MetricsCollector instance, which is called in several places of the client code.

The client supports Micrometer, Dropwizard Metrics and OpenTelemetry out of the box.

Here are the collected metrics:

Number of open connections
Number of open channels
Number of published messages
Number of confirmed messages
Number of negatively acknowledged (nack-ed) outbound messages
Number of unroutable outbound messages that got returned
Number of failures of outbound messages
Number of consumed messages
Number of acknowledged messages
Number of rejected messages

Both Micrometer and Dropwizard Metrics provide counts, but also mean rate, last five minute rate, etc, for messages-related metrics. They also support common tools for monitoring and reporting (JMX, Graphite, Ganglia, Datadog, etc). See the dedicated sections below for more details.

Developers should keep a few things in mind when enabling metric collection.

Don't forget to add the appropriate dependencies (in Maven, Gradle, or even as JAR files) to JVM classpath when using Micrometer or Dropwizard Metrics. Those are optional dependencies and will not be pulled automatically with the Java client. You may also need to add other dependencies depending on the reporting backend(s) used.
Metrics collection is extensible. Implementing a custom MetricsCollector for specific needs is encouraged.
The MetricsCollector is set at the ConnectionFactory level but can be shared across different instances.
Metrics collection doesn't support transactions. E.g. if an acknowledgment is sent in a transaction and the transaction is then rolled back, the acknowledgment is counted in the client metrics (but not by the broker obviously). Note the acknowledgment is actually sent to the broker and then cancelled by the transaction rollback, so the client metrics are correct in term of acknowledgments sent. As a summary, don't use client metrics for critical business logic, they're not guaranteed to be perfectly accurate. They are meant to be used to simplify reasoning about a running system and make operations more efficient.

Micrometer support

Metric collection has to be enabled first:

Micrometer the following way:

ConnectionFactory connectionFactory = new ConnectionFactory();
MicrometerMetricsCollector metrics = new MicrometerMetricsCollector();
connectionFactory.setMetricsCollector(metrics);
...
metrics.getPublishedMessages(); // get Micrometer's Counter object

Micrometer supports several reporting backends: Netflix Atlas, Prometheus, Datadog, Influx, JMX, etc.

You would typically pass in an instance of MeterRegistry to the MicrometerMetricsCollector. Here is an example with JMX:

JmxMeterRegistry registry = new JmxMeterRegistry();
MicrometerMetricsCollector metrics = new MicrometerMetricsCollector(registry);
ConnectionFactory connectionFactory = new ConnectionFactory();
connectionFactory.setMetricsCollector(metrics);

Dropwizard Metrics support

Enable metrics collection with Dropwizard like so:

ConnectionFactory connectionFactory = new ConnectionFactory();
StandardMetricsCollector metrics = new StandardMetricsCollector();
connectionFactory.setMetricsCollector(metrics);
...
metrics.getPublishedMessages(); // get Metrics' Meter object

Dropwizard Metrics supports several reporting backends: console, JMX, HTTP, Graphite, Ganglia, etc.

You would typically pass in an instance of MetricsRegistry to the StandardMetricsCollector. Here is an example with JMX:

MetricRegistry registry = new MetricRegistry();
StandardMetricsCollector metrics = new StandardMetricsCollector(registry);

ConnectionFactory connectionFactory = new ConnectionFactory();
connectionFactory.setMetricsCollector(metrics);

JmxReporter reporter = JmxReporter
  .forRegistry(registry)
  .inDomain("com.rabbitmq.client.jmx")
  .build();
reporter.start();

RabbitMQ Java Client on Google App Engine

Using RabbitMQ Java client on Google App Engine (GAE) requires using a custom thread factory that instantiates thread using GAE's ThreadManager (see above). In addition, it is necessary to set a low heartbeat interval (4-5 seconds) to avoid running into the low InputStream read timeouts on GAE:

ConnectionFactory factory = new ConnectionFactory();
cf.setRequestedHeartbeat(5);

Caveats and Limitations

To make topology recovery possible, RabbitMQ Java client maintains a cache of declared queues, exchanges, and bindings. The cache is per-connection. Certain RabbitMQ features make it impossible for clients to observe some topology changes, e.g. when a queue is deleted due to TTL. RabbitMQ Java client tries to invalidate cache entries in the most common cases:

When a queue is deleted.
When an exchange is deleted.
When a binding is deleted.
When a consumer is cancelled on an auto-deleted queue.
When a queue or exchange is unbound from an auto-deleted exchange.

However, the client cannot track these topology changes beyond a single connection. Applications that rely on auto-delete queues or exchanges, as well as queue TTL (note: not message TTL!), and use automatic connection recovery, should explicitly delete entities know to be unused or deleted, to purge client-side topology cache. This is facilitated by Channel#queueDelete, Channel#exchangeDelete, Channel#queueUnbind, and Channel#exchangeUnbind being idempotent in RabbitMQ 3.3.x (deleting what's not there does not result in an exception).

The RPC (Request/Reply) Pattern: an Example

As a programming convenience, the Java client API offers a class RpcClient which uses a temporary reply queue to provide simple RPC-style communication facilities via AMQP 0-9-1.

The class doesn't impose any particular format on the RPC arguments and return values. It simply provides a mechanism for sending a message to a given exchange with a particular routing key, and waiting for a response on a reply queue.

import com.rabbitmq.client.RpcClient;

RpcClient rpc = new RpcClient(channel, exchangeName, routingKey);

(The implementation details of how this class uses AMQP 0-9-1 are as follows: request messages are sent with the basic.correlation_id field set to a value unique for this RpcClient instance, and with basic.reply_to set to the name of the reply queue.)

Once you have created an instance of this class, you can use it to send RPC requests by using any of the following methods:

byte[] primitiveCall(byte[] message);
String stringCall(String message)
Map mapCall(Map message)
Map mapCall(Object[] keyValuePairs)

The primitiveCall method transfers raw byte arrays as the request and response bodies. The method stringCall is a thin convenience wrapper around primitiveCall, treating the message bodies as String instances in the default character encoding.

The mapCall variants are a little more sophisticated: they encode a java.util.Map containing ordinary Java values into an AMQP 0-9-1 binary table representation, and decode the response in the same way. (Note that there are some restrictions on what value types can be used here - see the javadoc for details.)

All the marshalling/unmarshalling convenience methods use primitiveCall as a transport mechanism, and just provide a wrapping layer on top of it.

TLS Support

It's possible to encrypt the communication between the client and the broker using TLS. Client and server authentication (a.k.a. peer verification) is also supported. Here is the simplest, most naive way to use encryption with the Java client:

ConnectionFactory factory = new ConnectionFactory();
factory.setHost("localhost");
factory.setPort(5671);

// Only suitable for development.
// This code will not perform peer certificate chain verification and prone
// to man-in-the-middle attacks.
// See the main TLS guide to learn about peer verification and how to enable it.
factory.useSslProtocol();

Note the client doesn't enforce any server authentication (peer certificate chain verification) in the above sample as the default, "trust all certificates" TrustManager is used. This is convenient for local development but prone to man-in-the-middle attacks and therefore not recommended for production.

To learn more about TLS support in RabbitMQ, see the TLS guide. If you only want to configure the Java client (especially the peer verification and trust manager parts), read the appropriate section of the TLS guide.

OAuth 2 Support

The client can authenticate against an OAuth 2 server like UAA. The OAuth 2 plugin must be enabled on the server side and configured to use the same OAuth 2 server as the client.

Getting the OAuth 2 Token

The Java client provides the OAuth2ClientCredentialsGrantCredentialsProvider class to get a JWT token using the OAuth 2 Client Credentials flow. The client will send the JWT token in the password field when opening a connection. The broker will then verify the JWT token signature, validity, and permissions before authorising the connection and granting access to the requested virtual host.

Prefer the use of OAuth2ClientCredentialsGrantCredentialsProviderBuilder to create an OAuth2ClientCredentialsGrantCredentialsProvider instance and then set it up on the ConnectionFactory. The following snippet shows how to configure and create an instance of the OAuth 2 credentials provider for the example setup of the OAuth 2 plugin:

import com.rabbitmq.client.impl.OAuth2ClientCredentialsGrantCredentialsProvider.
        OAuth2ClientCredentialsGrantCredentialsProviderBuilder;
...
CredentialsProvider credentialsProvider =
  new OAuth2ClientCredentialsGrantCredentialsProviderBuilder()
    .tokenEndpointUri("http://localhost:8080/uaa/oauth/token/")
    .clientId("rabbit_client").clientSecret("rabbit_secret")
    .grantType("password")
    .parameter("username", "rabbit_super")
    .parameter("password", "rabbit_super")
    .build();

connectionFactory.setCredentialsProvider(credentialsProvider);

In production, make sure to use HTTPS for the token endpoint URI and configure the SSLContext if necessary for the HTTPS requests (to verify and trust the identity of the OAuth 2 server). The following snippet does so by using the tls().sslContext() method from OAuth2ClientCredentialsGrantCredentialsProviderBuilder:

SSLContext sslContext = ... // create and initialise SSLContext

CredentialsProvider credentialsProvider =
  new OAuth2ClientCredentialsGrantCredentialsProviderBuilder()
    .tokenEndpointUri("http://localhost:8080/uaa/oauth/token/")
    .clientId("rabbit_client").clientSecret("rabbit_secret")
    .grantType("password")
    .parameter("username", "rabbit_super")
    .parameter("password", "rabbit_super")
    .tls()                    // configure TLS
      .sslContext(sslContext) // set SSLContext
      .builder()              // back to main configuration
    .build();

Please consult the Javadoc to see all the available options.

Refreshing the Token

Tokens expire and the broker will refuse operations on connections with expired tokens. To avoid this, it is possible to call CredentialsProvider#refresh() before expiration and send the new token to the server. This is cumbersome from an application point of view, so the Java client provides help with the DefaultCredentialsRefreshService. This utility tracks used tokens, refreshes them before they expire, and send the new tokens for the connections it is responsible for.

The following snippet shows how to create a DefaultCredentialsRefreshService instance and set it up on the ConnectionFactory:

import com.rabbitmq.client.impl.DefaultCredentialsRefreshService.
        DefaultCredentialsRefreshServiceBuilder;
...
CredentialsRefreshService refreshService =
  new DefaultCredentialsRefreshServiceBuilder().build();
cf.setCredentialsRefreshService(refreshService);

The DefaultCredentialsRefreshService schedules a refresh after 80% of the token validity time, e.g. if the token expires in 60 minutes, it will be refreshed after 48 minutes. This is the default behaviour, please consult the Javadoc for more information.

Java Client API Guide

Overview​

Support Timeline​

JDK and Android Version Support​

License​

Overview​

Connections and Channels​

Connecting to RabbitMQ​

Connecting Using a URI​

Using Lists of Endpoints​

Disconnecting from RabbitMQ​

Connection and Channel Lifespan​

Client-Provided Connection Name​

Using Exchanges and Queues​

Passive Declaration​

Operations with Optional Responses​

Deleting Entities and Purging Messages​

Publishing Messages​

Channels and Concurrency Considerations (Thread Safety)​

Receiving Messages by Subscription ("Push API")​

Retrieving Individual Messages ("Pull API")​

Handling unroutable messages​

Shutdown Protocol​

Overview of the Client Shutdown Process​

Information about the circumstances of a shutdown​

Atomicity and use of the isOpen() method​

Advanced Connection options​

Consumer Operation Thread Pool​

Service discovery with the AddressResolver interface​

Heartbeat Timeout​

Custom Thread Factories​

Support for Java non-blocking IO​

Automatic Recovery From Network Failures​

Connection Recovery​

When Will Connection Recovery Be Triggered?​

Recovery Listeners​

Effects on Publishing​

Topology Recovery​

Failure Detection and Recovery Limitations​

Manual Acknowledgements and Automatic Recovery​

Channels Lifecycle and Topology Recovery​

Unhandled Exceptions​

Metrics and Monitoring​

Micrometer support​

Dropwizard Metrics support​

RabbitMQ Java Client on Google App Engine​

Caveats and Limitations​

The RPC (Request/Reply) Pattern: an Example​

TLS Support​

OAuth 2 Support​

Getting the OAuth 2 Token​

Refreshing the Token​

Overview

Support Timeline

JDK and Android Version Support

License

Overview

Connections and Channels

Connecting to RabbitMQ

Connecting Using a URI

Using Lists of Endpoints

Disconnecting from RabbitMQ

Connection and Channel Lifespan

Client-Provided Connection Name

Using Exchanges and Queues

Passive Declaration

Operations with Optional Responses

Deleting Entities and Purging Messages

Publishing Messages

Channels and Concurrency Considerations (Thread Safety)

Receiving Messages by Subscription ("Push API")

Retrieving Individual Messages ("Pull API")

Handling unroutable messages

Shutdown Protocol

Overview of the Client Shutdown Process

Information about the circumstances of a shutdown

Atomicity and use of the isOpen() method

Advanced Connection options

Consumer Operation Thread Pool

Service discovery with the AddressResolver interface

Heartbeat Timeout

Custom Thread Factories

Support for Java non-blocking IO

Automatic Recovery From Network Failures

Connection Recovery

When Will Connection Recovery Be Triggered?

Recovery Listeners

Effects on Publishing

Topology Recovery

Failure Detection and Recovery Limitations

Manual Acknowledgements and Automatic Recovery

Channels Lifecycle and Topology Recovery

Unhandled Exceptions

Metrics and Monitoring

Micrometer support

Dropwizard Metrics support

RabbitMQ Java Client on Google App Engine

Caveats and Limitations

The RPC (Request/Reply) Pattern: an Example

TLS Support

OAuth 2 Support

Getting the OAuth 2 Token

Refreshing the Token